Follow some steps of the transformation of the glass. Click in the images to see the transformation.
1 – Selection of the Glass Plate Cutting
This is the first operation, where the order is given by the operator of the cut table, where this opens the drawer of the glass classifier, that contains the type of desired glass (this glass could monolithic or be plated). After the cupping-glass enters and sucks/holds theglass and carries it to the cut table.
Once the glass is placed in the cut table, the cupping-glass is free to get another glass plate.
2 – Cut of the Glass Plate
After being carried through the improvement of the glass plate, it is ready to be cut in the cut table. After that, the glass plate is moved to the truncate table and there takes place the operation of truncation of the glass.
Then the operator separates glasses in a classifier and places it, methodically, in one easel.
3 – Accomplishment of Aluminum
When the glass is cut the production of aluminum is carried out. This consists in executing the cut of aluminum to the measure of the glass and later fill it with salts, which will absorb the moistness of the chamber of the double glass.
This aluminum main contain aluminum profiles, with only an aesthetic purpose.
4 – Line of the Double Glass Glass
BIZALCLIT ® is formed through several stages, during the line of the double glass. First the glass is washed and dry, being applied to it later the aluminum previously buzzarded in order to be able to stick/paste to the glass.
Before placing aluminum in the glass it is placed on de glass a mark of the manufacturer (being in the interior of the double glass).
After the application of a second aluminum in the initial one, they are moved to the machine for pressing and are pressed one against the other.
Once they are pressed, they are tighted by an automatic sealer in all its perimeter with polysulfiric and it is applied cues in the glasses, and after that they are placed in easels.
5 – Expedition of the Double Glass
Once time the easel is placed in the expedition zone. The glasses must be separate by cues of cork or rubber, to prevent the scratching during the transport.